Motor Analyzer
Motor Analyzer Parameters
9
Electrical Parameters
The second screen is the electrical power and power factor. It shows the voltage unbalance and harmonics
voltage factor according to NEMA MG1.
Use
to move between the screens for electrical and mechanical parameters.
Softkeys:
View Analyzer Limit
The View Analyzer Limit screen has the same information as the Set Analyzer Limits screen but is read-
only. The only allowed action is
(OK or BACK) to go to the Motor Analyzer screen where the LIMITS
screen was activated.
To change the information:
1.
Go to the MOTOR ANALYZER screen or METER screen.
2.
Press
to stop the process.
View ANALYZER LIMITS screen.
Select METER screen.
Select DERATING screen.
View MOTOR SETUP screen.
STOP measurements and save measurement results.
Содержание 438-II
Страница 4: ...ii 438 II Users Manual...
