Fluke 2700G, Руководство по калибровке

Страница: 12 / 18

2700G
Calibration Manual
4
Maintenance
Clean the Product
Clean the Product with a soft cloth dampened with water or water and weak
soap.

Caution
To prevent possible damage to the Product, do not use
solvents or abrasive cleansers.

Caution
For safe operation and maintenance of the product:
•
Repair the Product before use if the battery leaks.
•
Remove batteries to prevent battery leakage and damage to
the Product if it is not used for an extended period.
•
Be sure that the battery polarity is correct to prevent battery
leakage.
•
Have an approved technician repair the Product.
Change the Batteries

Warning
To prevent possible electrical shock, fire, or personal injury,
have an approved technician repair the Product.
To change the batteries, see Figure 1:
1. Pull off the Product cover.
2. Use a Phillips screwdriver to loosen the captive screw on the battery door.
3. Remove the battery door.
4. Replace the three AA batteries, note the correct polarity.
5. Install the battery door again.
6. Tighten the captive screw.
7. Put the Product cover back on.