123B/124B/125B
Users Manual
56
If no free memory locations are available, a message
pops up for you to overwrite the oldest data set.
To continue:
1. Push
3
to cancel the overwrite to the oldest data
set. You must delete one or more memory locations
and then save again. See
Data Set Management
for
more information.
2. Push
4
to overwrite the oldest data set.
Test Sequence
Use test sequences to set up the Test Tool for the most
often-used settings or a sequence of frequent tests.
To recall a setting marked with a test sequence number:
1. Push
to open the menu.
2. Push
1
to open the TEST SEQUENCE menu.
3. Use
YZ
to highlight the setup. The selected test
sequence number is automatically the next number
after a previously selected number and helps you do
a sequence of tests. No cursor keys need to be used.
4. Push
to accept the setup.
hxv44.eps
Only the data sets stored as a test sequence number
are visible in the TEST SEQUENCE menu. Other
data sets are visible when you select
3
(Recall).
1.888.610.7664
Fluke-Direct
.com
