Fluke Calibration 7526A, Начало работы

Страница: 15 / 30

Precision Process Calibrator
Product Description
7
Primary Input/Output Display and Controls
Figure 3 shows the primary input/output display and controls.
SET RECALL
LOCAL EXP
AUTOSET
INPUT OUTPUT ZERO
RNG LOCK
C / F CJC DISPLAY
7 8 9
VOLTS STBY
OPR
TYPE
UNITS
CE
ENTER SHIFT
TC
RTD
mA
4 5 6
1 2
0
3
1
4
2 3
gwp003.eps
Item Description

Display:
A two-line, 16-character display that gives all visual user feedback for the
primary output and input operations. See the “Display Layout” and “Error Messages”
section of the Users Manual for more information.

Numeric and Secondary Function Keys:
Output value data entry keys. Secondary
function selection per the text printed above the numeric key. Push

and then the
numeric key to select the function.

OUTPUT

Change RTD/Ohms or Thermocouple to output mode.

INPUT

Change RTD/Ohms or Thermocouple to input mode.

ZERO

Zero the input for Pressure, Thermocouple millivolts, or RTD
ohms.

SETUP

Adjust the LCD Contrast, LCD Backlight, and Remote Interface
Configuration as given in “LCD and Remote Interface Setup
Procedures” in Chapter 5 of the Users Manual.

CJC

Select internal or external cold junction compensation for
Thermocouple temperature measurements. When external
compensation is selected, XCJC is shown at the start of the
second line.
Figure 3. Primary Input/Output Display and Controls