Fluidwell F130-P, Руководство пользователя

Страница: 23 / 48

Page 23
FW_F130P_v1702_02_EN
Set the sensor supply
1. Make the F130-P safe. If applicable, mind the battery power.
2. Open the F130-P and carefully remove the cable-connectors and the protective cover.
3. Find and set the switches and select the V
out
as required.
4. Close the protective cover and install the cable connectors.
5. Close the F130-P .
Risk of electrocution - High voltage!
Make sure, all the leads to the terminals are disconnected from the F130-P and NEVER
connect the mains power supply to the unit when the protection cover has been removed!
Type PD Power supply in: 8-24V AC / 10-30V DC
Switch location (typical)
Sensor V
out
selection
Sensor supply out
A
1 2 3 4 NOTE: Use an AC
autotransformer (spartrafo) with
galvanic isolation.
int - off off Coil 1.2V DC; <1mA
Reed 3V DC; <1mA
ext - on
on
off on
off
off 8.2V DC @8V
in
AC / 10V
in
DC
12V DC @10V
in
AC / 14V
in
DC
24V DC @18V
in
AC / 26V
in
DC
Type PF Power supply in :
15-24V AC / 20-30V DC
Switch location (typical)
Sensor V
out
selection
Sensor supply out
A
1 2 3 4
int - off off Coil 1.2V DC; <1mA
Reed 3V DC; <1mA
ext - on
on
off on
off
off 8.2V DC @8V
in
AC / 10V
in
DC
12V DC @10V
in
AC / 14V
in
DC
24V DC @18V
in
AC / 26V
in
DC
Type PM Power supply in : 115V - 230V AC
Switch location (typical)
Sensor V
out
selection
Sensor supply out
A
1 2 3 4
int - off off Coil 1.2V DC; <1mA
Reed 3V DC; <1mA
ext - on
on
off on
off
off 8.2V DC
12V DC
24V DC
Fig. 11: Sensor supply voltage - Switch setting
Terminal 00-01; basic POWER SUPPLY - type PX.
Connect an external power supply of 8-30VDC to these terminals; the " - " to terminal 00 and the " + "
to terminal 01. When power is applied to these terminals, the (optional) internal battery will be
disabled / enabled automatically to extend the battery life time.
Terminal 03-04; control or pulse output R2:
This output is available to control the batch process for two-step control or as pulse output. In case
of a pulse output function: the maximum pulse frequency of this output is 500Hz.