FW_F112P_v1901_02_EN.docx
Page 17
3.1.10.
EXPLANATION OF SETUP MENU 9 - COMMUNICATION (OPTION)
This product is designed for the connection to a communication network. Products with a
communication option do not include cyber security functions. Fluidwell cannot take any
responsibility for the cyber security, omissions or errors in the communication safety. To maintain a
secure operation, automation and control, it is the sole responsibility of the owner to install and
manage the appropriate safety measures to protect the network, the product and the communication
against any kind of security breaches.
The functions described below deal with hardware that is not part of the standard delivery.
Programming of these functions does not have any effect if this hardware has not been installed.
Consult Appendix C and the Modbus communication protocol description for a detailed explanation.
SPEED
91
This setting is used to set the Baudrate.
ADDRESS
92
This setting is used to set the communication address for the F112-P.
MODE
93
This setting is used to set the Modbus transmission mode. Select OFF to disable
the communication.
3.1.11.
EXPLANATION OF SETUP MENU A - OTHERS
For support and maintenance it is important to have information about the characteristics of the E110-P. Your
supplier will ask for this information when support is required.
MODEL
A1
This setting shows the model name.
SOFTWARE VERSION
A2
This setting shows the version number of the firmware (software).
SERIAL NO
A3
This setting shows the serial number.
PASSWORD
A4
This setting is used to set a password (pin code) to limit the access for the
setup menu. Only persons who know the pin code can access the setup
menu. The pin code 0000 disables the pin code to allow for access by any
person.
TAG-NR
A5
This setting is used to set a tag number for the F112-P.
