Fluidwell F112-A, Руководство пользователя

Страница: 42 / 48

FW_F112A_v1702_02_EN
Page 42
Setup variables
PDU
ADDRESS
REGISTER VARIABLE
TOTAL
NO.
REGISTERS
R/W TYPE
VALUE / REMARKS
[d] 32
[h] 0x020 40033 unit 1 r/w uint16 0=none
1=L
2= m
3
3=kg
4= lb
5=gal 6= US GAL
7=bbl
[d] 33
[h] 0x021 40034 decimals 1 r/w uint16 0…3
[d] 34
[h] 0x022 40035 span 2 r/w uint32 1...9999999
Representation: 0.000001…9999999 depending on
variable 54: decimals span.
[d] 37
[h] 0x025 40038 decimals span 1 r/w uint16 0…6
PDU
ADDRESS
REGISTER VARIABLE
FLOWRATE
NO.
REGISTERS
R/W TYPE
VALUE / REMARKS
[d] 48
[h] 0x030 40049 unit 1 r/w uint16 0=mL
1=L
2= m
3
3=mg
4=g
5=kg
6=ton
7=GAL 8=bbl
9=lb
10=cf
11=rev 12=none
13=scf
14=NM
3
15=NL
16=p
[d] 49
[h] 0x031 40050 time unit 1 r/w uint16 0=/sec 1=/min 2=/hour 3=/day
[d] 50
[h] 0x032 40051 decimals 1 r/w uint16 0…3
[d] 51
[h] 0x033 40052 span 2 r/w uint32 1...9999999
Representation: 0.000001…9999999
depending on variable 54: decimals span.
[d] 54
[h] 0x036 40055 decimals span 1 r/w uint16 0…6
PDU
ADDRESS
REGISTER VARIABLE
DISPLAY
NO.
REGISTERS
R/W TYPE
VALUE / REMARKS
[d] 64
[h] 0x040 40065 display function 1 r/w uint16 0=total 1=flow rate
[d] 67
[h] 0x043 40068 backlight brightness 1 r/w uint16 0=off
1=20%
2=40%
3=60% 4=80%
5=100%
PDU
ADDRESS
REGISTER VARIABLE
POWER MANAGEMENT
NO.
REGISTERS
R/W TYPE
VALUE / REMARKS
[d] 80
[h] 0x050 40081 LCD update time 1 r/w uint16 0=fast
1=1sec
2=3sec
3=15sec 4=30sec
5=off
[d] 81
[h] 0x051 40082 power mode 1 r/w uint16 0=operational 1=shelf
PDU
ADDRESS
REGISTER VARIABLE
LINEARIZATION
NO.
REGISTERS
R/W TYPE
VALUE / REMARKS
[d] 1024
[h] 0x400 41025 percentage/M-factor 3 r/w uint48 The linearization table is an INDEXED variable.
Reading and writing the entries of the linearization
tables is done by first selecting the entry through
the index. Valid values for the index are 0…14,
which correspond with the linearization table entries
1 through 15. Indexes outside this range will result
in an error being sent back.
(See the communication-section of this appendix for
setting the index and its extended functionality
through variable 150 and 149).
The 3 registers represent a structure containing 2
variables of each 3 bytes. The three least significant
bytes (PDU address 1024 and LSB of PDU address
1025) contain the percentage part, the three most
significant bytes (MSB of PDU address 1025 and
PDU address 1026) contain the M-factor part.
Valid range for the percentage is (0)4-20mA..
A value of 0 for percenatge means that entry is
disabled.
Valid range for the M-factor 0.000000 to 9.999999.
[d]1038
[h]0x40E 41039 Linearization on/off 1 r/w uint16 0=disable 1=enable