Fluidwell F043-T, Руководство пользователя

Страница: 7 / 44

Page 7
FW-F043-T-M_v0404_01_EN.docx
2 OPERATIONAL
2.1 GENERAL INFORMATION
This chapter describes the daily use of the F043-T. This instruction is meant for users / operators.
•
The F043-T may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed
•
Take careful notice of the "Safety rules, instructions and precautionary measures" in the
front of this manual.
2.2 CONTROL PANEL
The control panel has three keys. The following keys are available:
Fig. 2: Control panel.
Functions of the keys
PROG -key
This key is used to program and save new values or settings.
The PROG-key is also used to gain access to SETUP-level; please read chapter 3.
SELECT -key
This key is used to SELECT the displayed information.
CLEAR -key
This key is used to CLEAR the value of total.
2.3 OPERATOR INFORMATION AND FUNCTIONS
In general, the F043-T will always function at Operator level. The information displayed is dependent
upon the SETUP-settings. The signal from the connected sensor is processed by the F043-T in the
background, whichever screen refresh rate setting is chosen. After pressing a key, the display will be
updated very quickly during a 30 second period, after which it will slow-down again.
Fig. 3: Example of display information during process.
For the Operator, the following functions are available:
•
Display temperature
This is the main display information of the F043-T. After selecting any other information, it will
always return to this main display automatically.
Temperature is displayed on the upper-line of the display and the measuring unit on the bottom
line. When "-------" is shown, then the value is too high to be displayed. The arrows

indicate
the increase/decrease of the temperature trend.
RUN