Fluidwell F030-A, Руководство пользователя

Страница: 11 / 56

Page 11
FW-F030-P-M_v0404_01_EN.docx
Use the control panel to navigate through SETUP-level
PROG -key
When a function is selected, this key is used to start the programming sequence.
When only a function group is selected (and no function), this key is used to scroll back
a function group (e.g. 3
→
2
→
1
→
3).
START -key
This key is used to select the next function in the list (e.g. 1
→
1.1
→
1.2
→
1). When
the top of the list is reached, it will wrap around and return to the function group
selection.
STOP -key
This key is used to select the previous function in the list (e.g. 1.2
→
1.1
→
1
→
2).
When the bottom of the list is reached, it will return to the function group selection.
When only a function group is selected (and no function), this key is used to scroll to
the next function group. (e.g. 1
→
2
→
3
→
1).
3.2.3 PROGRAMMING SEQUENCE
After selecting a function at SETUP-level, a new value can be programmed using the control panel.
A function either contains a value (a number with optionally a decimal point, e.g. 123.45) or a list
with items (e.g. Disable
– Enable).
For each function that needs to change, navigate to that function and follow the steps indicated
below. During the programming sequence, the display will deactivate the
SETUP indicator and
activate the PROGRAM indicator.
When programming new values, alterations will only be set after the PROG-key has been
pressed to confirm the new value! (STEP 3)
Step 1: Starting the programming sequence
PROG -key
When a function is selected at SETUP-level, this key is used to start the programming
sequence.
Step 2a: Changing a value
START -key
This key is used to increment the selected digit.
When the entered value is out of range, the increase sign
▲ or decrease-sign ▼ will
be displayed while you are programming. If this value is confirmed by pressing the
PROG-key, the value will be brought within a valid range automatically.
STOP -key
This key is used to select the next digit. If a decimal point can be set, this will be
included in the sequence as well (e.g. [decimal point]
→
digit 1
→
digit 2
→
digit 3
→
[decimal point].