Page 7
FW_B-SMART_v0306-01_EN.docx
2 OPERATIONAL
2.1
GENERAL INFORMATION
This chapter describes the daily use of the B-SMART. This instruction is meant for users / operators.
•
The B-SMART may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed
•
Take careful notice of the
“Safety rules, instructions and precautionary measures” in the
front of this manual.
2.2
CONTROL PANEL
The following keys are available:
Fig. 2: Control panel
Functions of the keys
SELECT
-key
This key is used to:
•
SELECT the displayed information, like accumulated total and flowrate.
•
gain access to SETUP-level; please read chapter 3.
CLEAR
-key
This key is used to CLEAR the value of total.
CLEAR
-key
Press both keys simultaneously to program and save new values or settings.
2.3
OPERATOR INFORMATION AND FUNCTIONS
By default, the B-SMART will act at Operator level. For the Operator, the following functions are
available:
Display process values
On the main screen, the primary process value is shown: Flowrate on the upper-line of the display
and the measuring and time unit on the bottom line.
Fig. 3: Example of display information during process
