Page 18
FW_B-SMART_v0306-01_EN.docx
4.4.2
MOUNTING
Wall mounting
The enclosure can be wall mounted with screws using the four available mounting holes.
A:
4x screw / bolt:
•
Head diameter: 6-8mm / 0.24"- 0.31"
•
Shaft diameter: maximum 5mm / 0.2"
•
Shaft length: minimum 50mm / 2"
•
Use the correct plugs if applicable
Note: The rear-enclosure part can be rotated in steps of 90°, enabling cable entry from any side.
Fig. 9: Installation
– Wall mounted
Sensor mounting
The enclosure can be mounted on a sensor by using the mounting hole at the bottom and a lock nut.
B:
Tube diameter: max. 20mm / 0.79". Max. nut height 25mm / 1"
Fig. 10: Installation
– Sensor mounted
