fluidra AQUABOT SUPER BRAVO, Инструкция по эксплуатации и перечень запасных частей

Страница: 4 / 43

A
B
slot
key
slot
key
Transformer
socket
Cable
plug
C D
Push and rotate right to lock
E
F
To plug the cable (Fig A) into the socket on the power supply
(Fig . B), please do the following:
1. Prepare the plug as seen in (Fig. C) with the key and 3 outside
slots exactly as shown.
2. Fit exactly the key and the slots from cable plug with the
corresponding key and slots from the transformer socket.
(Fig. D)
3. Push the plug into the socket of the transformer all the way in.
4. Once the plug is in, rotate the plug to the right to lock it into
place (Fig.E).
5. To remove the plug, first rotate the plug to the left to unlock it,
then pull it out (Fig. F).
Socket (B)
Cable plug (A)
Operating the pool cleaner
Rotate left and pull to unlock
4
a. Light indicates that the machine is running.
b. Green push button turns the machine ”ON”.
c. Red push button turns the machine “OFF”.
IMPORTANT - After every cycle the pool
cleaner will turn off automatically . In case you
want to turn the machine off during the
working cycle, push the
red button once and
the indicator light will turn off , indicating that
the machine has stopped running.
IMPORTANT:
Please be sure to always keep your pool cleaner properly stored anywhere between
10 to 40 degrees Celsius (50 to 104 degrees Fahrenheit). This will keep the motors,
plastics and seals protected. Failure to comply will result in loss of warranty.
Robot can be used in water with temperatures ranging from 13°C to 35°C (55°F to
95°F). However, the recommended optimal temperature is between 22°C and 32°C
(72°F and 90°F)
CAUTION:
To avoid scratches and other blemishes appearing on your robot, simply find a
smooth surface for it to rest on when cleaning the debris bag or performing minor
adjustments.
These scratches could produce changes in the robots soft and smooth edges
resulting in potential damage to some flexible pool surfaces.
smooth
surface smooth
surface