Fluid Management Smart Fill, Руководство по эксплуатации

Страница: 8 / 31

Part I
SmartFill Operation and Administration
5 Communications Setup
The SmartFill GEN 2 is designed to automatically send data to a central website using either a direct Ethernet connection,
3G or WiFi. Ethernet is standard with all units and 3G or WiFi are optional modules that can be ordered with the unit or
tted later.
5.1 3G
The 3G module is located in the upper left hand corner of the unit to operate it needs to be tted with a 3G data SIM.
The picture below shows how the SIM is tted into the module:
5.1.1 Details for the 3G SIM
The SmartFill GEN 2 module uses a 3G SIM enabled for data to send data to your website account. Below are the details
of what is required for the card:
•
Application Description: A machine to machine application where data is automatically send to a website
•
Data Capacity: Minimum of 500MB per month (.5GB)
•
Passcode Settings: Passcode should be disabled. This should be done when the card is supplied, but can also be
done by tting the card into a phone and using the phone settings menu to turn on this functionality
•
Physical Size: To t into the module the SIM must a Standard SIM, as shown below NOT a micro or nano SIM.
Mini SIM
•
Service Provider/ Plan: All service providers can provide a data SIM and plans vary between suppliers. The default
conguration for the access point in the SmartFill unit is Telstra, but this can be changed if needs be in the SmartFill
set up menu.
Telstra have a machine to machine data plan, M2M, which is specically designed for this type of application. Details can be
found at: http://www.telstra.com.au/business-enterprise/business-products/managed-services/machine-2-machine/
Once the SIM is installed, you can view the status of the connection by holding down the 4 key.
8