Fluid Management Customer Service 1.800.462.2466
Important S
Harbil NSC80 Series | 5
•
Read and adhere to all
Warning and Caution
labels on the machine.
•
Prepare, level, and clear
the area where the
machine will be
installed.
•
To avoid risk of fire or
injury, unplug the
power before servicing
electrical components.
•
DO NOT use the
dispenser with or near
flammable or
combustible materials.
•
DO NOT dispense
flammable materials.
•
After installing,
complete a purge for
each position.
•
Check that canisters are
in place and secure.
•
DO NOT install
equipment in an area
that water jet equipment
is used.
•
Ensure that nothing
rests on your
equipment’s cables and
that the cables are not
located where they can
be stepped on or tripped
over.
•
Plug into an approved
grounded outlet only.
Make sure the outlet
meets all national and
local codes.
•
To reduce the risk of
electric shock or injury,
use indoors only.
How to Use this
Guide
This
guide is organized
into
eleven
sections.
Each section provides
detailed information on NSC80 Dispenser topics and provides a basic reference
that can be used to help you with specific issues.
Important:
Carefully read all the installation instructions and the safety
information before you first use your NSC80 Dispenser.
This guide provides instructions for safely and easily installing your NSC80
Dispenser when it arrives. This publication also includes operational instructions,
daily and preventative maintenance procedures, basic troubleshooting
suggestions, customer service, and warranty information.
If you are an experienced user, you may already know enough to get started. Make
sure you look over the information in
Getting to Know Your NSC80 Dispenser
to
find out about the features of this NSC80 Dispenser.
If you have internet access, the most current information for your NSC80
Dispenser is available from the worldwide web at
http://www.fluidman.com
For Your Safety
Customer safety is important. Our products are designed to be safe and effective.
However, dispensers are electrical equipment. The NSC80 Dispenser is safe and
reliable—designed to bring many years of operation. There are precautions you
can take to avoid damage to the equipment or bodily injury before operating. By
carefully following the instructions in this document and the warning and
maintenance labels on the machine, you can help protect yourself from hazards
and create a safer work environment.
Equipment can become damaged due to misuse or neglect. Some product damage
is serious enough that the product should not be used again until it has been
inspected and, if necessary, repaired by a Fluid Management authorized service
technician.
As with any electronic device, pay close attention to the mixer when it is turned on.
On very rare occasions, you might notice an odor or see a puff of smoke or sparks
vent from your machine, or you might hear sounds like popping, cracking or
hissing. These conditions might merely mean that an internal electronic component
has failed in a safe and controlled manner. However, it may indicate a potential
safety
issue.
DO NOT
take risks or attempt to diagnose the situation yourself.
Contact Fluid Management at 1-800-462-2466 for assistance.
NOTE:
This appliance can be used by children aged from 8 years and above, and persons
with reduced physical, sensory, or mental capabilities or lack of experience and
knowledge, if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
