Fluid Management Customer Service 1.800.462.2466
Important Safety Information
Harbil NSC80 Series | 15
Unplug from outlet before servicing and cleaning.
To ensure safe, dependable operation of the equipment, follow the maintenance schedule detailed
below:
DAILY
Cleaning & Filling:
•
Agitate colorants every morning for five (5) to ten (10) minutes.
•
Clean nozzles & outside cabinet surfaces with soap and water.
•
Check canisters and fill as required.
WEEKLY
Cleaning & Nozzle Maintenance:
•
Dispense a full measure of any colorant that has not been used during the
previous week. Dispense into a clean container and return to the appropriate
canister.
•
Clean all accessible inside surfaces with soap and water.
•
Clean nozzle closers and inspect sealing pads.
o
Open nozzle closer, pull towards you and clean using soap and water.
o
Return nozzle closer into canister, which will click into place.
o
Close nozzle closer.
