/ 12 /
REQUIRED TOOLS
Phillips Head Screwdriver
ATTACHING THE BACKPLATE
Place the backplate on the PCB and make sure all holes are aligned.
Position an M2.5X7 AX1 screw in each of the six (6) mounting holes
(as shown in the image) and tighten them evenly with a Phillips head
screwdriver.
Do not use excessive force!
You must remove the protective foil from both sides of the
Backplate before installation!
For this Step, you will need:
M2.5 x 7 AX1
(6 pcs)
7 mm
Phillips Head
Screwdriver
M2.5 x 7 AX1
BACKPLATE
