Instructions for Use:
Stowing Bimini:
NOTE:
At this point your bimini should be loosely hanging
from rear of tower. In the next steps, we’ll show you how to
stow bimini, then deploy.
Step 1:
Stow bimini.
Fold Stanchions toward center of
boat, then secure to underside of Front Frame using velcro
strap.
Fig-23
Step 2:
Pull Pins out of Hinges on Rear Frame to allow the
frame to collapse.
Fig-24
HINT: Occaisonally there may
be tension on the bimini frame which makes the pins
difficult to pull out. If so, try slightly pulling the bimini
frame upwards and towards the center of the boat (at
the hinge) while pulling pins. This should alleviate and
tension in hinge pins.
Allow frame to fold, then manuever
Rear Frame to sit just behind the Front Frame. Place loose
canvas over the top and wrap around both frames.
Fig-25
Step 3:
Using frame clips, clip folded frame together.
Fig-
26
The canvas and the frame clips should hold the frame in
place long enough to get the Bimini Boot over the canvas.
HINT: Depending on boat and speaker package, it may
be easier to use a small strap or have someone help
hold frame for next step.
Step 4:
Install Bimini Boot.
Pull boot over top of frame
and canvas. Zip to secure.
Fig-27
The bimini should be
secure and stowed at this point.
NOTE:
While towing boat when bimini is in the stow position,
it is a good idea to push dangling hinge pins into hole. Be
sure to remember to remove them before deploying bimini!
Fig 23
Fig 24
Fig 25
Fig 26
Fig 27
Fluid Concepts Page 8
White Nylon Frame
Clips
