Flue & Ducting GO-FLUE, Руководство пользователя

Страница: 3 / 8

leakage. Dura Flue can also be power swept both
ways.
INSTALLATION: Where any bends occur in the chimney it
would be advisable to remove a small hole in the wall
to ensure the liner has to been installed properly.
We advise that the installation is at least a two man job.
Attach the nose cone and string to what will be the
bottom of the liner.
Installer 1 takes the liner to the top of the chimney and
drops down the string.
Installer 2 collects the string at the bottom ensuring that
the liner does not snag or catch any obstacles on the
way down.
Installer 1 twists the liner down the flue ensuring that it
doesn’t snag or catch any obstacles on the way down
and Installer 2 pulls the string.
NOTE: To ensure the diameter will fit, draw a 1 metre
length of the liner in the diameter you are planning to
use through the chimney first (do not use full lengths or
smaller pieces taped together).
Once the liner is fully down the flue, connect all
required adaptors, clamps and plates using suitable
sealant for wood/multi fuel appliances and self-taping
screws (not supplied in this pack).
Put back on chimney pot and flaunch back as
required.
If the original masonry flue is larger than 9” x 9” or/and is
on an outside wall, Flue and Ducting Ltd highly
recommend the liner is insulated. This decision is to be
made by the HETAS registered installer.