Flowserve.com 14
PUIOM000649-00-UIM (EN/AQ)
August 2022
SEM-100SS User Instructions
4.3.2 Operation
TO METER FLUID:
With the pump and meter properly installed, the meter
will wake up automatically and begin to display the Current Total as fluid is
pumped.
TO DISPLAY CURRENT TOTAL:
Press
“ON”
button.
TO RESET CURRENT TOTAL TO ZERO:
Press and hold
“RESET”
button for 3 seconds while the Current Total is displayed. Current Total will
be reset to “.00”.
TO DISPLAY TOTAL-2:
While the Current Total is displayed, press and
hold
“TOTAL-2”
button. Total units pumped will be displayed as long as
“TOTAL-2”
is pressed.
Note:
TOTAL-2 cannot be reset to zero.
TO DISPLAY FLOW RATE:
With meter on, press and hold the
“ON”
button for 2 seconds. The display will read “FX.X”, with the numbers
indicating flow rate in units of volume per minute. To return to the Current
Total screen, press and hold the
“ON”
button for 2 seconds again.
TO TURN ON BACKLIGHT:
With meter on, press the
“ON”
button, then
press the
“RESET / CAL-3”
button. The backlight will turn on. To turn off
the backlight press the
“ON”
button, then press the
“RESET / CAL-3”
button again. The backlight will also turn off automatically after 10 seconds
with no input.
SHUT DOWN:
The meter will automatically turn off after 40 seconds with
no input.
