Flowserve IPS Wireless SELD-102, Инструкция пользователя

Страница: 4 / 22

IPS WIRELESS SELD-102 Node ENGLISH 702-3001 07-17
Page 4 of 22
flowserve.com
there is any doubt as to the suitability of the
product for the application intended, contact
Flowserve for advice.
If the conditions of service on your purchase order are
going to be changed (for example: liquid pumped,
temperature or duty) it is requested that the user
seeks the written agreement of Flowserve before start
up.
1.6 Safety
1.6.1 Summary of safety markings
These User Instructions contain specific safety
markings where non-observance of an instruction
would cause hazards. The specific safety markings
are:
This symbol indicates electrical safety
instructions where non-compliance will involve a
high risk to personal safety or the loss of life.
This symbol indicates safety instructions
where non-compliance would affect personal safety
and could result in loss of life.
This symbol indicates “hazardous and toxic
fluid” safety instructions where non-compliance
would affect personal safety and could result in loss
of life.
This symbol indicates safety
instructions where non-compliance will involve some
risk to safe operation and personal safety and would
damage the equipment or property.
This symbol indicates explosive atmosphere
zone marking according to ATEX. It is used in
safety instructions where non-compliance in the
hazardous area would cause the risk of an
explosion.
This symbol is used in safety instructions to
remind not to rub non-metallic surfaces with a dry
cloth; ensure the cloth is damp.
It is used in safety
instructions where non-compliance in the
hazardous area would cause the risk of an
explosion.
This sign is not a safety symbol but
indicates an important instruction in the assembly
process.
1.6.2 Personnel qualification and training
All personnel involved in the operation, installation,
inspection and maintenance of the unit must be
qualified to carry out the work involved. If the
personnel in question do not already possess the
necessary knowledge and skill, appropriate training
and instruction must be provided. If required the
operator may commission the
manufacturer/supplier to provide applicable
training.
Always coordinate repair activity with operations
and health and safety personnel, and follow all
plant safety requirements and applicable safety and
health laws and regulations.
1.6.3 Safety action
This is a summary of conditions and actions to
help prevent injury to personnel and damage to
the environment and to equipment. For
products used in potentially explosive
atmospheres section 1.6.4 also applies.
NEVER DO MAINTENANCE WORK
WHEN THE UNIT IS CONNECTED TO POWER
(Lock out.)
HANDLING COMPONENTS
Many precision parts have sharp corners and the
wearing of appropriate safety gloves and
equipment is required when handling these
components. To lift heavy pieces above 25 kg (55
lb.) use a crane appropriate for the mass and in
accordance with current local regulations.
1.6.4 Products used in potentially explosive
atmospheres
Measures are required to:

Avoid excess temperature

Prevent buildup of explosive mixtures

Prevent the generation of sparks
1.7 Specific machine performance
For performance parameters see section
1.5 Duty
conditions. Where performance data has been
supplied separately to the purchaser these should be
obtained and retained with these User Instructions if
required
.
1.8 Specifications
1.8.1 SELD-102 Node unit specifications
Operating frequency:
868 MHz or 900 MHz
Channels: (External) 1-Sensor
Channels: (Internal) 1-Battery Voltage,
1-Onboard Temperature
Transmission rates: 5 seconds or higher
Operating temperature: -40°C to +85°C (-40°F to