2
Kämmer Series 341000 FCD KMENIM4104-01 03/18
1
USING KÄMMER VALVES AND ACTUATORS CORRECTLY
1.1 General
The following instructions are designed to assist in installing and performing maintenance as required on FLOWSERVE
Kämmer products. Product users and maintenance personnel should Thoroughly review this maintenance instruction prior
to installing and prior to performing any maintenance on the product.
DANGER
: Please review also the general Installation and Operational Manual (IOM) for general safety instructions.
1.2
Terms concerning safety
The safety terms
DANGER, WARNING, CAUTION
and
NOTE
are used in these instructions to highlight particular dangers
and/or to provide additional information on aspects that may not be readily apparent.
DANGER:
indicates that death, severe personal injury and / or substantial property damage will occur if proper precautions
are not taken.
STOP!
WARNING:
indicates that death, severe personal injury and / or substantial property damage can occur if proper precautions
are not taken.
CAUTION:
indicates that minor personal injury and / or property damage can occur if proper precautions are not taken.
NOTE:
indicates and provides additional technical information, which may not be very obvious even to qualified personnel.
Compliance with other, not particularly emphasized notes, with regard to transport, assembly, operation and maintenance
and with regard to technical documentation (e.g. in the operating instruction, product documentation or on the product
itself) is essential, in order to avoid faults, which in themselves might directly or indirectly cause severe personal injury or
property damage.
STOP!
Contents
1
Using Kämmer Valves And Actuators Correctly
2
Initial Installation
3.
Trim Parts
4 Actuator
5 Identification
6
Spare Parts
7
Technical Tables
8
Trouble Shooting
