FlowLine AU23-4313 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 20

FlowLine AU23-4313 Скачать руководство пользователя страница 17

LM900006 Rev 0_3

17

|

Installation

Step Eight

SMART TRAK™, IN-TANK INSTALLATION:

Flowline's Smart Trak™ mounting system is an in-tank fitting, which enables users to install any technology,
along the entire length of track. Smart Trak™ may be installed thru the top wall of any tank or flange, using a
standard 2" NPT tank adapter or blind flange. If tank top is not available, Flowline's side mount bracket, LM50-
1001, enables Smart Trak™ to be installed directly to the side wall or lip of the tank.

Tank Adapter:

Flange Mounting:

Side Mount Bracket (LM50 series):

Lip of Tank

Side-Wall

SMART TRAK™, INSTALLATION:

The Smart Trak™ with Compact Junction
Box assembly is designed to be installed
through a 2” NPT (2” G) thread. The level
switches will be staggered through the
fitting for installation.

A key feature of Smart Trak™ is the
adjustability of the level switches. When
two level switches are placed close
together, one of the switches will need to
be moved to allow for the switches to be
staggered into the installation fitting. Once
installed, the level switch can be returned
to its required position.

«
...
15
16
17
18
19
...
»

Содержание AU23-4313





















Отзывы:

Нет отзывов