motor to stop running.
d.
In
Pulse mode
: Short connect K4 for the motor to run at full speed. Disconnect
it for the motor to stop.
⑤
The motor working status output terminal:
Output motor working status as below:
If connecting with relays, when the motor runs, K1 connects. When the motor stops
running, the K1 disconnects.
⑥
RS232 Communication
:
Choosing RS232 in the communication settings
interface makes this terminal active.
GND
: Communication ground terminal.
TXD
:
Master sending: Peristaltic pump receives terminal signal.
RXD
:
Peristaltic pump sending: Master receives terminal signal.
RS232 Communication Interface Connection Diagram as below
:
