Flotec FPSC2150A Скачать руководство пользователя страница 2

Страница: 2 / 16

For parts or assistance, call Flotec Customer Service at

1-800-365-6832

Specifications and Safety

DESCRIPTION

This Submersible Sump Pump is designed for home
sumps. Unit is equipped with a 3-prong grounding-
type power cord. Shaded-pole motor is oil filled and
sealed for cooler running. Sleeve bearings on motor
shaft never need lubrication. Automatic reset thermal
protection.

SPECIFICATIONS

Power supply required ...........................115V, 60 HZ.
Liquid Temp. Range ................32°F to 70°F(0°-21°C)
Individual Branch Circuit Required (min.) ....15 Amps
Discharge:................................................1-1/2" FNPT

NOTICE:

This unit is not designed for applications

involving salt water or brine! Use with salt water or
brine will void warranty.

Pump water only with this pump.

Do not use where water recirculates.

Not designed as a swimming pool drainer.

PERFORMANCE

ELECTRICAL & SWITCH SPECIFICATIONS

GENERAL SAFETY INFORMATION

Electrically powered sump pumps normally give
many years of trouble-free service when correctly
installed, maintained, and used. However, unusual
circumstances (interruption of power to the pump,
dirt/debris in the sump, flooding that exceeds the
pump’s capacity, electrical or mechanical failure in
the pump, etc.) may prevent your pump from
functioning normally. To prevent possible water
damage due to flooding, consult your retailer about a
secondary AC sump pump, a DC backup sump
pump, and/or a high water alarm. See the
“Troubleshooting Chart” in this manual for
information about common sump pump problems
and remedies. For more information, see your
retailer, call Flotec customer service at
1-800-365-6832 or visit our website at
www.flotecwater.com.

1. Know the pump application, limitations, and

potential hazards.

Do not use in water with fish present. If any oil
leaks out of the motor it can kill fish.

3. Disconnect power before servicing.
4. Release all pressure within system before

servicing any component.

5. Drain all water from system before servicing.
6. Secure discharge line before starting pump. An

unsecured discharge line will whip, possibly
causing personal injury and/or property damage.

7. Check hoses for weak or worn condition before

each use, making certain that all connections are
secure.

8. Periodically inspect sump, pump and system

components. Keep free of debris and foreign
objects. Perform routine maintenance as
required.

9. Provide means of pressure relief for pumps whose

discharge line can be shut-off or obstructed.

10. Personal Safety:

a. Wear safety glasses at all times when working

with pumps.

b. Keep work area clean, uncluttered and

properly lighted – replace all unused tools
and equipment.

c. Keep visitors at a safe distance from work area.
d. Make workshop child-proof – with padlocks,

master switches, and by removing starter keys.

11. When wiring an electrically driven pump, follow

all electrical and safety codes that apply.

12.

This equipment is only for use on 115 volt
(single phase) and is equipped with an
approved 3-conductor cord and 3-prong,
grounding-type plug.

To reduce risk of electric shock,

pull plug before servicing. This pump has not
been investigated for use in swimming pool
areas. Pump is supplied with a grounding
conductor and grounding-type attachment plug.
Be sure it is connected only to a properly
grounded grounding-type receptacle.
Where a 2-prong wall receptacle is encountered,
it must be replaced with properly grounded
3-prong receptacle installed in accordance with
codes and ordinances that apply.

13. All wiring should be performed by a qualified

electrician.

14. Make certain power source conforms to

requirements of your equipment.

15. Protect electrical cord from sharp objects, hot

surfaces, oil, and chemicals. Avoid kinking cord.
Replace or repair damaged or worn cords
immediately.

16. Do not touch an operating motor. Modern motors

can operate at high temperatures.

TOTAL FEET (M)

Motor

Series

(1.5m)