Parts Breakdown for FP723
Replacement Parts for FP723
FP723
FP723
3/8” Pistol Impact
3/8” Pistol Impact
Limited Warranty
Florida Pneumatic warrants its tools to be free from defects in material and workmanship for two
years from the date of purchase. This warranty does not apply to tools which have been abused,
misused, modified or repaired by someone other than Florida Pneumatic or its authorized service
centers. If a Florida Pneumatic proves defective in material of workmanship within two years after
purchase, return it to any authorized service center or to Florida Pneumatic, freight prepaid. Please
enclose your name, address and adequate proof of purchase date with a brief description of the
defect. Florida Pneumatic will, at its option, repair or replace defective tools, free of charge. Repairs
or replacements are warranted as described above for the remainder of the warranty period.
Florida Pneumatic's sole liability and your exclusive remedy under this warranty is limited to repair or
replacement of the defective tool. There are no other warranties expressed or implied and Florida
Pneumatic shall not be liable for incidental, consequential or special damages, or any other damages,
costs or expense of repair or replacement as described above.
USE ONLY IMPACT SOCKETS & ACCESSORIES
Sockets and accessories used shall be of the impact socket type. Always check sockets,
retainers and drives regularly for wear or damage and replace whenever necessary
Drive size...........................................................................................................................3/8"
Free speed (No load).........................................................................................11,000 RPM
Impacts per minute.............................................................................................1,200 IPM
Torque range.....................................................................................90 Ft. Lbs. @ 90 psi
Bolt Capacity....................................................................................................................3/8”
Weight........................................................................................................................2-5/8 lbs.
Overall length..................................................................................................................5 1/2"
Average air consumption.........................................................................................3 CFM
Recommended hose size.....................................................................................3/8" I.D.
Air inlet.....................................................................................................................1/4" NPT
Maximum operating pressure.................................................................................90 psi
Ref. Description Part #
Ref. Description Part #
24 Rubber nose guard
8729029
25 Cap gasket
8729887A
26 Handle gasket
8729888
27 Throttle body
8729889
28 Reverse valve
8729890
29 Throttle lever
8729891
30 Hose adapter
8729815
31 Throttle regulator
8729892
32 O-Ring
8729893
33 Spring
8729894
34 Push rod
8729895
35 O-Ring
8729896
36 Spring pin
8729897
37 Washer
8729898
38 Retaining ring
8729899
39 O-Ring (2)
8729900
40 Spring pin
8729901
41 Steel ball
8729902
42 Spring
8729903
43 Washer (2)
8729035
44 Cap screw (2)
8729880
45 O-Ring retainer
8729043
1 Cap screw (4)
8729880
2 Washer(4)
8729035
3 Cap
8729882A
4 Bushing
8729851
5 Motor housing (w/Ref. 4)
8729850A
6 Seal
8729883
7 Oil fill plug
8729739
8 Ball bearing
81005062
9 Rear plate
8729884
10 Front plate
8729885
11
Motor pin
8729886
12 Rotor blade (6)
8729853
13 Rotor
8729854
14 Cylinder
8729855
15 Oil seal
8729019
16 O-Ring
8729109
17 O-Ring
8729809
18 Hammer
8729810
19 Pin (2)
8729811
20 Cage
8729812
21 Anvil (w/Ref. Nos. 22,23)
8729813
22 Rubber ring
8729480
23 Socket ret. ring
8729788
