FlorCraft 709-3928, Руководство оператора, Страница: 9 / 12

Page 8
ASSEMBLY
WARNING:
If any part is broken
or missing, DO NOT attempt to attach the
battery pack, or operate the tool until the
broken or missing part is replaced. Failure
to do so could result in possible serious
injury.
WARNING:
Do not attempt to
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious injury.
WARNING:
Your tool should
never be connected to the power source
when you are assembling parts, making
adjustments, installing or removing
application tools, cleaning, or when it is
not in use. Disconnecting the tool will
prevent accidental starting, which could
cause serious personal injury.
CONTENTS
Water pump, water outlet and Operator’s
manual
UNPACKING
1. Carefully remove the tool and any
accessories from the carton. Make sure
that all items listed in the packing list are
included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
OPERATION
Attach the water outlet to the pump
Insert the water outlet into the pump as
shown in FIG.3.
Attach the pump to the water hose
1. Securely fit one end of the tile saw water
hose onto the water outlet on the pump.
2. Fit the other end of the water hose onto
the water input hole of the tile saw.
3. Place the water pump fully into the
water in the water tray. The four suction
cups will hold the pump securely to the
water tray.
4. Attach the plug to an AC 120V, 60Hz
power supply, the pump will be running
automatically.
Adjust the water flow
1. To increase the water flow, rotate the
adjustment knob counter-clockwise.
2. To decrease the water flow, rotate the
adjustment knob clockwise.
FIG. 3
Water outlet