Q
Cleaning
o
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from it after each use and before storage.
o
Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
o
Inspect the product before each use for worn
and damaged parts. Do not operate it if you
find broken and worn parts.
o
Never allow fluids to get into the product.
o
Clean the product with a dry cloth. Use a
brush for areas that are hard to reach.
NOTE
u
Do not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants to
clean this product as they might be harmful to
its surfaces.
Q
Maintenance
Before and after each use, check the product
and accessories (or attachments) for wear and
damage. If required, exchange them for new ones
as described in this instruction manual. Observe
the technical requirements (see “Technical data”).
Q
Repair
This product does not contain any parts that can
be repaired by the user. Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired.
Q
Storage
o
Switch the product off, remove the battery
pack
17
and disengage the safety key
7c
.
o
Clean the product as described (see
“Cleaning”).
o
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place.
o
Always store the product in a place that is
inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C.
o
We recommend covering the product with a
suitable cloth or enclosure to protect it against
dust.
o
Regularly check the charge level of the
battery pack, if it is to be stored for an
extended period. Optimum storage conditions
are cool and dry. Optimal state of charge for
storage is approximately 50%.
Q
Transportation
CAUTION! RISK OF INJURY!
Lift with two persons.
o
Switch the product off and, remove the
battery pack
17
and disengage the safety
key
7c
.
o
Attach shipping devices, if applicable.
o
When lifting is unavoidable, lift with two
people. The product should only be lifted by
the carrying handle
5
and front end of the
product. Wear safety gloves when carrying
the product to prevent accidental contact of
the blade.
o
Always push the product by its handle.
o
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles.
o
Secure the product to prevent it from slipping
or falling over.
Q
Troubleshooting
WARNING!
u
Only perform the steps described within
these instructions! All further inspection,
maintenance and repair work must be
performed by an authorised service centre or
a similarly qualified specialist if you cannot
solve the problem yourself!
Suspected malfunctions are often due to causes
that the users can fix themselves. Therefore check
the product using this section. In most cases the
problem can be solved quickly.
18 GB
