Q
Switching on and off
Switching on:
1. Operate the lock-off button
15
and hold it in
position (see Fig. K).
2. Pull the on / off switch
16
towards the
handle
1
to switch on. Release the lock-off
button
15
.
Switching off:
1. Release the on / off switch
16
to switch off.
Q
Mowing
WARNING! RISK OF INJURY!
u
If the product strikes a foreign object stop
the motor! Switch the product off, remove
the battery pack, disengage the safety key
and let it cool down. Inspect the product
thoroughly for damage! Have any damage
repaired before restarting!
u
Extensive vibration of the product during
operation is an indication of damage! Stop
the motor. The product should be promptly
inspected and repaired!
WARNING!
u
In some countries regulations define at
what time of the day and on what special
days products are allowed to be used and
what restrictions apply! Ask your community
for detailed information and observe the
regulations in order to preserve a peaceful
neighbourhood and avoid committing
administrative offences!
o
Make sure that the lawn is clear of stones,
sticks, wire or other objects that could
damage the product or its motor.
o
Do not cut wet grass because it tends to stick
to the underbody of the product, preventing
the proper discharge of grass clippings, and it
could also cause you to slip and fall.
o
Never cut off more than one-third of the total
length of the grass for a healthy lawn. In the
autumn, lawns should only be cut as long as
there is growth.
o
Slowly push the product forward.
o
Mow in slightly overlapping rows. The most
effective pattern for mowing lawns is straight
lines along one of the sides. This will keep the
rows even and ensures that all the lawn is cut
without missing any spots.
o
Circle around flower beds. When reaching
a flower bed in the middle of the lawn, cut a
row or two around the circumference of the
bed.
o
Pay special attention when changing
direction.
o
Empty the grass collector
11
regularly.
o
Switch the product off immediately if you
are disturbed while working by other people
entering the working area. Always let the
product come to complete stop before
averting.
o
Do not overwork yourself. Take regular breaks
to ensure you can concentrate on the work
and have full control over the product.
Q
After use
1. Switch the product off, remove the battery
pack
17
, disengage the safety key
7c
and
let it cool down.
2. Check, clean and store the product (see
“Cleaning and care”).
Q
Cleaning and care
WARNING!
Always switch the product off, remove
the battery pack and let the product
cool down before performing inspection,
maintenance and cleaning work!
CAUTION! RISK OF INJURY!
The blade(s) are sharp! Always wear
protective gloves when performing
inspection, maintenance and cleaning
work!
17
GB
