![FLORABEST FARM 40-Li A1 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/florabest/farm-40-li-a1/farm-40-li-a1_operation-and-safety-notes-translation-of-the-original-instructions_2307069013.webp)
2. Connect the power plug
18a
of the
charger
18
with the mains. The charging
status LED
18c
lights up red. The continuously
lit green charging status
LED
18d
indicates that the charging process is
complete.
3. Disconnect the power plug
18a
of the
charger
18
from the mains and remove the
battery pack
17
from the charger.
4. Attach the battery pack
17
back to the
product (see “Attaching / removing the
battery pack”).
Charging status LEDs
Green LED flashes
without battery pack
Charger ready
Green LED lights up
with battery pack
Battery pack fully
charged
Red LED lights up with
battery pack
Battery pack charging
Red and green LEDs
flashing
Battery pack defect
Red and green LEDs
continuously lit
Battery pack too cold
or warm
Q
Checking the battery charging
level
o
Press the battery level button
17c
to check the
charging level of the battery pack
17
. The
charging level will be shown on the battery
level indication lights
17b
.
4 Green LEDs
continuously lit
100% battery charging
level
3 Green LEDs
continuously lit
75% battery charging level
2 Green LEDs
continuously lit
50% battery charging level
1 Green LED
continuously lit
25% battery charging level
1 Green LED flashing Low battery charging level
o
Charge the battery pack
17
before operation
when it is at 25% or low battery charging
level.
Q
Safety key
This product is equipped with a safety key
7c
to
prevent unauthorised use. In order to operate the
product the safety key
7c
must be engaged in the
safety keyhole
7b
.
Engaging the safety key
1. Open the battery compartment cover
7
(see Fig. G).
2. Press the button on the safety key
7c
and
slide it into the safety keyhole
7b
. Ensure
it clicks noticeably in place. It shall not be
possible to remove the safety key
7c
without pressing its button.
Disengaging the safety key
1. Press the button on the safety key
7c
and
pull it out of the safety keyhole
7b
.
Q
Attaching / removing the
battery pack
Attaching the battery pack:
1. Open the battery compartment cover
7
(see Fig. G).
2. Align the battery pack
17
to the rails of the
battery pack bay and slide it into it. Ensure it
clicks noticeably in place.
Removing the battery pack:
1. Open the battery compartment cover
7
(see Fig. G).
2. Press the release button
17a
and slide out the
battery pack
17
from the battery pack bay.
Q
Operation
Q
Grass collector
This product can be used with a grass collector
11
that holds the cut grass for easy disposal. If not
used, the cut grass will be ejected through the rear
discharge opening.
To clear the rear discharge opening the mulch
plug
19
must be removed.
1. Lift the discharge cover
4
with one hand
and remove the mulch plug
19
.
15
GB