FLORABEST 280272, Инструкции по эксплуатации и безопасности

Страница: 8 / 39

8 GB/IE/NI
Do not spray on people!
Do not spray on animals!
Spray on plants only!
Do not use the product for
drinks!
Do not leave the pressure spray-
ing device standing in the sun.
There is a risk of explosion!
Keep away from naked flames
and heat sources. Seal containers
securely. Store in a fireproof way!
Do not use easily flammable fluids!
Volume flow: 0.5 litres/min. at a
maximum of 2.5 bar!
Protect from frost and store away
from frost.
Store at 0°C – 40°C in a dry,
dust-free location.
When pumping, always watch
the manometer to check the
operating pressure.
Wear suitable protective coating,
glove or mask.
Before using for the first time, pls
read the instruction carefully.
Before use
CAUTION! Check that the device is
functioning properly! Check the pressure
sprayer before each use to ensure that it
is free of visible damage and is func-
tioning safely. To do this, carry out the
following tests and inspections:
Check the tank
5
, the suction hose
12
and the carry strap
6
for visible damage.
Check that the hose connections are fitted
tightly.
Check that the pipe connections are fitted
tightly.
Pump the empty pressure sprayer to
approx. 1 bar.
The pressure must not fall more than ap-
prox. 0.5 bar in a space of 30 minutes.
Pump the pressure sprayer to approx.
2 bar.
Pull the safety valve
3
up to the stop.
You must be able to hear the pressure
escaping.
Bringing into use
Attaching the spray tube
(Fig. B)
Turn the union nut
10
anticlockwise to
release it from the handle
11
. Push the
spray tube
8
into the handle
11
as
far as it will go.
Tighten the union nut
10
by turning it
clockwise.