Maintenance Chart
Daily maintenance
After each 50 operating hours also
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
After each 100 operating hours also
After each 200 operating hours also
Check battery acid level, if required replenish destilled water.
Charge battery.
Check if machine is damaged or impaired in any way.
Check condition of dust filter and clean if necessary.
Empty dust container.
Check if battery leaks acid.
Clean and grease battery poles.
Check if sweeping rollers are worn or cluttered. Replace if required.
Check sweeping contour, readjust if required.
Check if side brush adjustment is worn, if required readjust or replace.
Search brush - roller tunnel for jammed particles and seized up dirt that may narrow the brush tunnel and
obstruct free roller brush movement.
Check cable isolation, replace cables if required.
Check if cable connections are tight.
- Grease steering chain.
Greas sweeping roller drive chain.
Clean dust filter, replace if necessary.
Search suction for obstacles, clean.
Conduct trial run to check all operating elements.
Check if roller drive chain is elongated or loosened.
Check all bearings for wear.
Check if seals are damaged or dislocated.
Check operation of electric motors.
Check if carbon brushes are worn, replace if required.
Check steering clearance, tighten chain if required.
Check all electrical system components whether they are soiled.
22
