Replacing the Side Brush
Dismounting the Side Brush
•
Turn off the Sweeping & Suction Machine.
•
Pull up the lowering lever for the side brushes.
•
Arrest the lowering lever.
•
Lift up the side brush motor in order to get easy access to
the fastening screws at the lower center of the side brush.
•
Loosen the fastening screw
(hexagon socket 5 mm) at bottom center of each
side brush.
•
Pull the side brush down and off.
•
Replace the side brush.
Mounting the Side Brush
•
Fasten the flange plate to the side brush.
•
Slide the washers onto the shaft of the side
brush motor.
The flange plate is equipped with a feather key.
The side brush motor shaft is equipped with a keyway.
•
Turn the side brush until the feather key fits
snugly into the keyway..
•
Slide the shim over the shaft of the side brush motor.
•
Fasten the side brush to the shaft of the side brush motor
by us of the fastening screw.
flange base with
feather key
shaft with keyway
side brush trimming
shim
fastening screw
side brush motor
washer
Side Brushes
15
level adjustment bolt
for side brush
Adjustment of the Side Brush
.
.
Operational wear necessitates additional adjustment of
the side brushes.
•
Turn off the Sweeping & Suction Machine.
•
Unlatch the lowering lever of the side brushes.
•
Push down the lowering lever.
•
Loosen the bolts of the front panel.
•
Remove the front panel.
•
Loosen the bolt of the side brush level adjustment.
•
Move the side brush to the desired position.
•
Tighten the bolt of the side brush level adjustment.
•
Fasten the front panel.
bolts for the
front panel
