GB
GB
22
PROGRAMMED MAINTENANCE
INTERVENTION
DAILY
ORDINARY
RECOVERY TANK CLEANING
•
SUCTION FILTER CLEANING
•
BRUSH CLEANING
•
BRUSH DISASSEMBLY
•
SQUEEGEE CLEANING
•
FRONT SQUEEGEE RUBBER REPLACEMENT
•
REAR SQUEEGEE RUBBER REPLACEMENT
•
SQUEEGEE HOSE CLEANING
•
SOLUTION TANK CLEANING
•
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
CHARACTERISTICS
PPL (Polypropylene)
Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
BRISTLES THICKNESS
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, it is recommended to use softer bristles which penetrate more easily
and deeper. Please be aware that when brushes bristles are worn out and therefore too small, they become rigid
and unable to penetrate and clean deeper. This may also happen with thicker bristles creating brush vibration.
PAD HOLDER
Pad holder is recommended to clean smooth surfaces. It has anchor points which permit the blocking of the
abrasive pad during work.
CODE
QUANTITY
DESCRIPTION
USE
48903020
1
Brush PPL 0,6 Ø 345
Normal floors.
48903030
1
Brush PPL 0,9 Ø 345
Smooth floors with small joints and persistent dirt.
48903050
1
Brush 5-mix Ø 345
For all types of floors.
48803010
1
Pad holder Ø 330
For pads of 14”, for smooth surfaces cleaning.
48803030
1
Pad holder Ø 330 + center lock green
For pads of 14”, for smooth surfaces cleaning.
48803040
1
Pad holder Ø 330 + center lock black
For pads of 14”, for smooth surfaces cleaning.
