EM6100 Handheld Portable Ultrasonic Flowmeter Ver.8.08
Flomotion
Systems,
Inc.
EM6100
16
(1) Press keys MENU 1 1 to enter M11 window to input the digits for the pipe outerdiameter,
and then press ENT key.
(2)
Press key
▼
/- to enter M12 window to input the digits for the pipe outer diameter and then press
ENT key.
(3)
Press key
▼
/- to enter M14 window, and press ENT key to enter the option selection mode. Use
keys
▲
/+ and
▼
/- to scroll up and down to the intended pipe material, and then press ENT key.
(4)
Press key
▼
/- to enter M16 window, press ENT key to enter the option selection mode, use keys
▲
/+ and
▼
/- to scroll up and down to the liner material, and then press ENT key. Select “No
Liner”, if there is no liner.
(5)
Press key
▼
/- to enter M20 window, press ENT key to enter the option selection mode, use keys
▲
/+ and
▼
/- to scroll up and down to the proper liquid, and then press ENT key.
(6)
Press key
▼
/- to enter M23 window, press ENT key to enter the option selection mode, use
keys
▲
/+ and
▼
/- to scroll up and down to the proper transducer type, and then press ENT
key.
(7)
Press key
▼
/- to enter M24 window, press ENT key to enter the option selection mode, use
keys
▲
/+and
▼
/- to scroll up and down to the proper transducer mounting method, and then press
ENT key.
(8)
Press key
▼
/- to enter M24 window to install the transducers on the pipe, and then press ENT
key to go to M01 for the results.
The first-time users may need some time to get familiar with the operation. However, the user friendly
interface of the instrument makes the operation quite easy and simple. Before long, the user will
configure the instrument with very little key pressing, since the interface allows the user to go to the
desired operation directly without any extra steps.
The following tips will facilitate the operation of this instrument.
(1) When the window display is between M00 to M09, press a number key x , the user will go directly to
the M0x window. For example, if the current window displays M01, press 7 and the user will go to M07.
(2) When the window display is under M00 to M09, press the ENT key and the user will go to M90;
press ENT key to return. Press the dot key to go to M11
When the window display is under M25, press ENT key to go to M01.