OPERATING INSTRUCTIONS
10
Parameter setting guidance
Temperature Value Setting:
1.
Depending on the workplace temperature
If the workplace temperature is around 30ºC and the AirWave Standard film with
a thickness of
20μm
is in use, then the reference temperature is: T=14.
AirWave Standard film (20µm): T=14
AirWave Bio film (20µm): T=10
2.
If the workplace temperature is colder, you may need to slightly increase the
temperature value; if the workplace temperature is hotter, need to slightly lower
the temperature value correspondingly. The reference is around 1 level/5 ºC.
3.
If roll film is thicker, the temperature value should be slightly increased
correspondingly. The reference value is around 2-
3 level/5μm.
4.
The temperature value should be set up correspondingly according to different
materials of film. The reference temperature value as above are based on the
standard air cushion films. The temperature value need to be adjusted again if
you use other air cushion films.
5.
If the air cushion machine has operated more than 2 hours, we suggest that you
slightly lower 1 level, because continuous working will accumulate heat.
Содержание AirBoy Nano3
Страница 1: ...nano3 OPERATING INSTRUCTIONS...
