Floe 500-95500-00, Руководство пользователя

Страница: 34 / 40

Page 34
Trouble Shooting
Questions & Answers
WHAT CAN CAUSE VIBRATION IN My TOW
VEHICLE?
1. Over tight hitch coupler -- Refer to Coupler
Adjustment Section of this manual.
2. Loose or worn-out wheel bearings -- Refer to
Wheel Bearing Adjustment Section of this manual.
3. Loose wheels -- Refer to Changing the Tire
section of this manual.
4. New tires -- It is possible that the new tires
are out of round. Once they are inflated to the
proper PSI and used for a short period of time
on a loaded trailer, they should work themselves
round. New tires that are still out of round after
an ample break in period may be defective and
need to be replaced. Call the tire manufacturer or
your local FLOE dealer for replacement.
5. Unbalanced wheel hubs -- If your tires are
balanced and not out of round this may be the
problem. Replace if necessary.
WHy DOES My TRAILER SWAy OR WHIP?
1. Trailer is not being towed level -- Refer to Proper
Loading and Unloading section of this manual.
2. Not enough tongue weight -- Refer to Proper
Loading and Unloading section of this manual.
3. Overloaded trailer -- Refer to Proper Loading
and Unloading section of this manual.
4. Too much tongue weight -- Refer to Proper
Loading and Unloading section of this manual.
WHy ARE My TIRES WEARING UNEVENLy?
1. Unequal side-to-side loading -- Refer to Proper
Loading and Unloading section of this manual.
2. Axle is not aligned properly -- Refer to Axle
Assembly section of this manual.
3. Tires not inflated to proper PSI
4. Wheel bearings are not properly tightened & oiled.
CAN I REPLACE My TIRES WITH LARGER ONES?
1. Yes, if you maintain a minimum of 3 inches of
clearance between your tire and the trailer frame
or bed.
WHy DO I kEEP BLOWING FUSES WHEN I
CONNECT OR USE My TRAILER LIGHTS?
1. Wrong amperage fuse -- Replace with proper
size.
2. A wire is cut or bare and is shorting out --
Visually locate and repair or replace.
WHy DO My LIGHTS BLINk ON AND OFF?
1. Corrosion on wire connections -- Check all
connections for corrosion, clean and apply
electrical grease to prevent future corrosion.
2. Improper ground to tow vehicle -- This may
cause all lights to blink or cause your marker
lights to blink when you turn on your turn
signals.
WHAT kIND OF GREASE SHOULD I USE IN My
HUBS?
Any high-quality lithium grease for grease style
hubs. Use oil if Turbo Lube style hubs (50W
min - 90w max.)
WHAT SHOULD I DO IF I GET ICE IN My VERSA
TRACk?
Simply use a screwdriver or any other suitable
object to clear it.
- - - - - - - - - - - - - - IMPORTANT- - - - - - - - - - - - - -
For additional information, please contact your
Authorized Floe Dealer, visit our website at
www.floeintl.com or call: 1-800-336-6337 to
locate the dealer nearest you.