manualshive.com logo in svg

Flo-tech Flo-Check USB, Инструкции по установке и программированию

Поделиться
Скачать
Flo-tech Flo-Check USB Скачать руководство пользователя страница 7

Flo-Check

®

 USB Hydraulic System Analyzer

Installation & Programming Instructions

Form No. 05-SGN-PM-00191 02/12 

Page 7

Installing the Software

To install the software package on your computer, perform the following steps:

1.  Close all applications you have running.
2.  Insert the Flo-Check USB Hydraulic System Analyzer CD into your CD drive.

If you have the auto-run feature enabled on your computer, the installation prompts will automatically be 
displayed.

Note:  If auto-run is not enabled, use Windows Explorer to navigate to the root directory on the CD.  Double-
click on the 

setup.exe

 

fi

 le to begin the installation.

3.  Follow the installation prompts to complete the installation.
4.  After a successful installation, a dialog will be displayed asking to restart the computer.  

Select 

Yes

.

Note:  If you wish to wait to reboot the computer, select ‘No’.  However, you will need to reboot before initial 
use for proper operation.

5.  The installation creates two shortcuts on the computer; one on the desktop and the second in the 

START – 

PROGRAMS – FLO-TECH

 Windows menu.

Connecting the Hydraulic Analyzer to Your Computer for the First Time

The Flo-Check USB Hydraulic System Analyzer connects to your computer through a USB port.  A cable is shipped 
with the unit, but any standard USB A Male to USB B Male cable can be used.  The initial connection is easy and uses 
standard drivers within Windows that do not require special driver installation by the operator. 

 

►

The Hydraulic Analyzer interface uses the Microsoft Human Interface Driver (HID).  This driver is installed 
with Windows operating systems that support USB.

 

►

The 

fi

 rst time you connect the device to your PC, your computer automatically detects it and con

fi

 gures the 

necessary drivers.  No third-party device drivers need to be installed.

 

►

The Hydraulic Analyzer interface is plug-and-play.  You can connect it to the computer before or after you 
install the software, and without shutting the computer off.

Note:  Before connecting the Hydraulic Analyzer to the computer, download and install the latest Microsoft Windows 
updates.  For Windows XP, there is a Hot

fi

 x KB822603 that is installed to address a serious error within Windows XP 

and the use of USB devices.

To connect the Hydraulic Analyzer to your computer:

1.  Connect the USB cable to the Hydraulic Analyzer and then plug the other end into a USB port on the 

computer.

2. The 

fi

 rst time the Hydraulic Analyzer is connected to the computer, several 

“Found New Hardware” 

balloons 

or dialogs pop up. This is normal.

3.  Once the Hardware has been found and installed, the last balloon or dialog states “Your new hardware is 

installed and ready to use.” At this point, the Hydraulic Analyzer interface has been successfully installed and 
can be used with the software application.

Содержание Flo-Check USB

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды