page 8
Manual MK23 V 1_09 Z33
Contents
The knobs can be used together for generating more complex velocity curves.
Example: both knobs set to maximum:
Knob setting:
Display:
Resulting Velocity Curve:
Your personal dynamic settings can be assigned by using „Setup Store“ to the current program
number. (For further details see secondary key functions page 10)
When recalling a previously stored dynamic setting all stored parameters (dynamic and both velocitiy
curves) are automatically set. Therefore the current position of the knobs might not be the one used
by the setting. In this case the LED of the knob in question doesn’t light up.
If you twist a knob the recalled settings are changed and the LEDs as well as the display behave again
as mentioned above. The stored settings stay in the memory till you use „Setup Store” and the same
program number again.
If you want to work with previously stored dynamic settings, push
Mode
while turning the knob in
question till the LEDs light up. Stored data is displayed and the knobs are in tune with your settings.
Note:
If you want to use your dynamic settings without changing the current program on the sound module,
it is possible to disable the program change. (See secondary key functions page 10 und 19) The display
changes to
with the profile number.
