page 18
Manual MK23 V 1_09 Z33
Contents
PP
EDAL
(O
PTIONAL
)
B
'''
(A#6)
Push
Mode
and
ON
. Display shows
Push and hold the black piano key of a pedal to your choice (Pedal Left for ex.)
With the piano key b''' (A#6) you can assign the PPedal effect. Display:
C
ONTROLLER
M
ODE
C
ONTIN
S
WITCH
Exit SKF Mode with the button
Mode
.
The Pianissimo Pedal effect enables you to play with more dynamic means of expression. Holding the
pedal makes playing very soft dynamic sounds a lot easier. The Pianissimo pedal operates directly
with the FLK Firmware and is not a MIDI effect. The high resolution and dynamic range is preserved
from Pianissimo to Fortissimo. Alternatively, this effect can be assigned to the Controllers B or K.
Push
Mode
and
ON
. Display shows
Push and hold the correspondent black key or select button by pressing, knob by slightly moving.
Check display. Keep holding key "Contr. set" while setting Contin or Switch by using the black keys.
cis'''' (C#7) Contin 0-127 (continuous) Display -
dis''''(D#7) Switch off on (0-64 off / 65-127 On) Display -
Buttons B1 B2
cis'''' (C#7) Contin push button Display
dis''''(D#7) Switch detent button Display
P
EDAL
I
NVERS
Exit SKF Mode with the button
Mode
.
Push
Mode
and
ON
. Display shows
Select a pedal or controller and push the black key „Ped Invers“ to invert the controller (relative to
the current state). The display will show
P
ED
C
AL
Exit SKF Mode with the button Mode.
Push
Mode
and
ON
. Display shows
20
With this key you are able to calibrate your pedals. More details see page Pedals
MIDI
C
HANNEL
S
ELECTION
1
–
16
Push
Mode
and
ON
. Display shows
D
ISPLAY
B
RIGHTNESS
Push and hold the black key b'''' (A#7) “Midi Ch.” and use the white numeric keys to select the
required MIDI channel from 1 to 16.
Exit SKF Mode with the button
Mode
.
Push
Mode
and
ON
. Display shows
Exit SKF Mode with the button Mode.
Using the prog buttons down up you can select low (1) or high (4).
