Flismaskin 1500, Руководство пользователя

Страница: 8 / 20

1.6. Pieces jamming the input tube can only be removed safely
when the engine is stopped, the spark plug cap removed
and the rotor is stopped and blocked. If necessary, unbolt
and tip the input and output tubes to facilitate access to the
rotor. Use a wooden pole to remove pieces stuck in the rotor.
Never use your hands.
(fig. 6 -­ 8)
1.7. Never leave the machine running unattended.
1.8. Changing the blades of the rotor or the counter blade and
checking blade bolts should only be done when the engine
and rotor are stopped, the spark plug cap is removed and the
rotor is blocked.
1.9. After one hour of use always check that all bolts and nuts are
still tightened properly. If not, tighten them again or bring the
machine back to your dealer/service-point.
1.10. Use only original parts for maintaining
your shredder, otherwise the warranty will be void.
1.11. The shredder can only be repaired by a skilled dealer/ser-
vice-point.
1.12. The shredder exceeds 90 dBA during operation. Therefore all
users and onlookers must wear ear-protection.
1.13 Before use, make secure that the bolts on the fixed blade are
firmly fixed. Check after one hour that the bolts still are firmly
fixed (just first time).
Manual Shredder - chipper
8