FLIR T6xx series, Руководство пользователя

Страница: 63 / 128

Annotating images 20
20.1 General
This section describes how to save additional information together with an infrared image
by using annotations.
Using annotations makes reporting and post-processing more efficient by providing es-
sential information about the image, e.g., conditions, photos, and information about
where an image is taken.
You can set the camera to automatically add an annotation to your images.
Note
Many of the procedures in this section assume that the camera is set to preview images before saving
them. If it is not, use the joystick to go to ( Mode ) > Settings > ( Preferences ) > Save button .
20.2 Taking a digital photo
20.2.1 General
When you save an infrared image you can also take a digital photo of the object of inter-
est. This digital photo will automatically be grouped together with the infrared image,
which will simplify post-processing and reporting.
20.2.2 Procedure
Note
• This procedure assumes that you have not set the camera to simultaneously take a digital photo at
the same time as the infrared image.
• The digital camera can be configured to capture digital photos at the same field of view as the infra-
red camera. For more information, see 23
Changing settings , page 61.
Follow this procedure:
1. To preview an infrared image, briefly push and release the Autofocus/Save button.
This will freeze the image and display the following toolbar:
2. Use the joystick to select .
3. Push the joystick to display a submenu.
4. Use the joystick to select
Digital camera photo .
5. Push the Autofocus/Save button to take the digital photo.
The digital photo will now be added to to what is called an “group,” and will be
grouped together with the infrared image in the image archive, and also when moving
files from the camera to reporting software on the computer.
20.3 Creating a voice annotation
20.3.1 General
A voice annotation is an audio recording that is stored in an infrared image file.
The voice annotation is recorded using a Bluetooth headset. The recording can be
played back in the camera, and in image analysis and reporting software from FLIR
Systems.
20.3.2 Procedure
Follow this procedure:
1. To preview an image, push and release the Autofocus/Save button fully down.
#T559598; r. AB/ 9443/9443; en-US 53