FLIR T6xx series, Руководство пользователя

Страница: 33 / 128

Configuring Wi-Fi
13
13.1 General
Depending on your camera configuration, you can connect the camera to a wireless local
area network (WLAN) using Wi-Fi, or let the camera provide Wi-Fi access to another
device.
You can connect the camera in two different ways:
• Most common use : Setting up a peer-to-peer connection (also called ad hoc or P2P
connection). This method is primarily used with other devices, e.g., an iPhone or iPad.
• Less common use : Connecting the camera to a WLAN.
13.2 Setting up a peer-to-peer connection (most common use)
Follow this procedure:
1. Go to ( Mode ) and then choose Settings .
2. Go to the Connectivity tab.
3. Under Wi-Fi , select Connect device .
4. Select Wi-Fi settings .
5. Enter values for the following parameters:
• SSID (the name of the network).
• Channel (the channel that the other device is broadcasting on).
• Encryption (the encryption algorithm, e.g., None or WEP).
• Key (the access key to the network).
• Address (the IP address for the network).
•
Gateway (the gateway IP address for the network).
Note
These parameters are set for your camera's network. They will be used by the external device to
connect that device to the network.
6. Push the joystick to confirm the choice.
13.3 Connecting the camera to a wireless local area network (less common use)
Follow this procedure:
1. Go to ( Mode ) and then choose Settings .
2. Go to the Connectivity tab.
3. Under Wi-Fi , select Connect to WLAN .
4. Select Wi-Fi settings .
5. Select one of the available networks.
Password-protected networks are indicated with a padlock icon, and for these you
will need to enter an access key.
6. Push the joystick to confirm the choice.
Note
Some networks do not broadcast their existence. To connect to such a network, select Add manually
and set all parameters manually according to that network.
#T559598; r. AB/ 9443/9443; en-US 23