FLIR T6xx series, Руководство пользователя

Страница: 45 / 128

Working with images 15
15.1 Saving an image
15.1.1 General
You can save an image directly, without previewing the image first.
15.1.2 Image capacity
This table gives information on the approximate number of infrared (IR) and digital cam-
era (DC) images that can be saved on memory cards:
Card size
IR only
IR + DC
IR + DC + 30 seconds
voice annotation
1 GB 1450 600 450
2 GB
2900 1200 900
15.1.3 Naming convention
The naming convention for images is one of the following:
• IR_xxxx.jpg , where xxxx is a unique counter.
• Date .
15.1.4 Procedure
Follow this procedure:
1. To save an image directly, push the Autofocus/Save button.
Note
You can change the function of the Autofocus/Save button under ( Mode ) > Settings > Preferen-
ces . The function can be set to one of the following:
• Preview/Save (Brief depression = Preview; Long depression = Save).
• Save directly (default setting)
• Always preview
15.2 Previewing an image
15.2.1 General
You can preview an infrared image (full infrared, fusion, picture-in-picture) or a digital
photo before you save it to a memory card. This enables you to see if the image or photo
contains the information you want before you save it.
In preview mode, you can also manipulate the image before you save it, and add annota-
tions in order to simplify report generation.
15.2.2 Procedure
Follow this procedure:
1. To preview an image, briefly push and release the Autofocus/Save button.
Note
This is not the default setting of the camera and requires that you change the behavior of the but-
ton. See below for instructions.
#T559598; r. AB/ 9443/9443; en-US 35