FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 126 / 164

September 12, 2016
118
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
Note:
The Image Flip function and the Image Inverse function are automatically disabled when the Privacy Mask
function is on. See
Camera – Misc1 (Miscellaneous Settings Menu 1) and Camera – Misc2
(Miscellaneous Settings Menu 2) , respectively.
Mask Setting
§
Switch – Select Switch: On or Switch: Off to activate or disable the Privacy Mask function. Click
Set to save the setting.
§
Transparency – Select Transparency: On or Transparency: Off to activate or disable Privacy
Mask transparency.
§
Color – Select the desired color from the Color drop-down menu for the specified Privacy Mask.
Click Set to save the setting.
§
Mask Number – Specify the number of the programmed Privacy Mask in the corresponding field.
§
Mask Size – Specify the Horizontal (1~80) and Vertical (1~60) size of the Privacy Mask.
§
Add – Click Add to save the programmed Privacy Mask.
Mask Clearing
To delete an existing Privacy Mask
1. Select the Privacy Mask to be removed from the Mask drop-down menu.
2. Click Clear .
9.5.8 Exposure
The Camera - Exposure screen is used to configure lens settings and exposure modes. The exposure is
the amount of light received by the image sensor and is determined by the amount of exposure by the
sensor (shutter speed), and other exposure parameters.
Administrators may either allow the camera to automatically select an exposure level using a programmed
algorithm or choose the level themselves. The smaller the number (the higher the shutter speed) that the
administrator selects, the lower the exposure level and vice versa.
Even in Auto mode, a Minimum Shutter Speed may be set from the drop-down menu to ensure a maximum
level of exposure. In Manual mode, the administrator can choose fixed shutter speeds from a drop-down
menu.
The exposure is the amount of light received by the image sensor and is determined by the width of the
lens diaphragm opening, the amount of exposure by the sensor (shutter speed), and other exposure
parameters.
For all units except the CP-4221-30x, on the Exposure page, users can select either Full Auto mode or
adjust the parameters of the Shutter Priority or Iris Priority. Users can also select Manual mode for
optimized video output in accordance with the operating environment.
Note:
The CP-4221-30x Exposure screen user interface is different than other units.