FLIR QUASAR CP-3211, Руководство пользователя и инструкция по установке, Страница: 123 / 164

115
September 12, 2016
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
To set up Sequence Line
1. In the Sequence setting section, click Edit . The Sequence Set screen opens.
Sequence Set Screen
2. Select a Sequence line number from the Sequence line drop-down list.
3. Define each Preset Point for the Sequence line in the desired order:
a. Select the first Preset Point from the Preset Name list. Use the PrePage or NextPage buttons to
navigate between the Sequence preset numbers.
b. Specify the Dwell time (between 0 and 127 seconds) for the first Preset Point.
c. Specify the camera’s Speed (between 0 and 14).
4. Repeat steps a, b, and c for up to 64 Preset Points.
5. Click
Save to save your preset sequence.
To run the camera through a Sequence line
1. From the Sequence run section, select the Sequence line from the drop-down list.
2. Click Go . The camera moves through each Preset Point sequentially as programmed.
To view the camera in full screen
1. Move the cursor onto the Live View pane.
2. Right-click and select
Full screen .
3. Double-click to exit Full screen mode.
To stop running a Sequence line
1. Move the cursor to the Live View pane and move the camera in any direction.