CM-6405 / CM-6408 Quick Install Guide Revision 120
December 2021
This document does not contain any export-controlled information.
b. Format the microSD card.
From the navigation bar, click
Settings
.Then, in the sidebar, click
System >
Edge Recording > SD Card.
Under Device Setting, you can select
vfat
(default) or
ext4
(recommended).
Click
Format
.
14 Default Video Configuration Settings
The camera's default Video Configuration settings appear in the following image.
CM-6405:
2688x1944 is the default stream1 resolution.
Default Video Configuration Settings - CM-6408
For more information about using the camera's web page to configure the camera,
see the camera's installation and user guide.
15 Attach the Camera to a Supported VMS
After mounting the camera and discovering or defining its IP address, use VMS
Discovery/Attach procedures to attach the camera to a supported VMS.
