FLIR MR265, Руководство пользователя

Страница: 45 / 66

Thermal and Visible Camera Operation
8
the Temperature Scale mode , press Select , and scroll to the ‘Lock’ mode
; press Select to confirm and to exit the menu. Some experimentation
and fine-tuning may be required to obtain the best possible contrast.
For additional programming details see Section 5.3 Temperature Scale menu .
8.3 Digital (Visible) Camera
Select the full screen Digital Camera from the menu system: Select button/Im-
age Mode/Digital Camera .
Figure 8.3 Selecting the Digital Camera image
The Digital Camera lens is located on the back of the meter. Face the lens to-
ward the area of interest and view the image on the display.
When the Laser pointer button is pressed, the Laser beam appears. Use
the Laser beam and the cross-hairs (‘Centre Spot’ selection in the Measure-
ment menu) to target the surfaces under test. The temperature reading repre-
sents the spot targeted by the cross-hairs and Laser pointer.
Note that the Laser is carefully aimed to align with the cross-hairs for easier
identification and targeting of objects and surfaces.
8.4 High/Low IR Temperature Alarm
1. To access the Alarm mode use the menu ( Settings/Measurement Parame-
ters/IR Temperature & Moisture Alarm mode ).
2. Select the ‘IR Temperature Alarm’ mode.
#NAS100070; r. AB/77165/77326; en-GB 39