FLIR MR265, Руководство пользователя

Страница: 37 / 66

Moisture Measurement Operation
7
PIN mode must be selected in the menu ( Moisture mode ) when an
external pin-based probe is used. Note the pin icon on the upper left of the
main display when selected. Pin-based readings are represented in %MC
(moisture content) for wood and %WME (wood moisture equivalent) for
materials other than wood.
Figure 7.9 Pin mode menu selection
• Pinless Mode
Pinless mode must be selected in the menu when using the internal sensor
( Moisture mode ). Note the pinless icon on the upper left of the main
display when selected. Pinless measurement readings are ‘relative’ scaled
(0~100).
Figure 7.10 Pinless mode selection
• MR12 Mode
MR12 mode must be selected when the optional MR12 Ball Moisture
probe is used. Connect the MR12 to the accessory socket on the bottom of
the MR265 (under the protective flap) and then select the MR12 from the
Moisture Mode menu as shown in
Figure 7–11 .
#NAS100070; r. AB/77165/77326; en-GB 31