FLIR MR176 USER MANUAL Document Identifier: MR176-en-GB_AB
13
5.
Psychometrics mode
In the Psychometrics mode the IR
Thermal Camera Image is off and the
meter displays all parameters except
moisture (Air Temperature, RH%, Dew
Point Temperature, Mixing Ratio, and
Vapor Pressure). See Fig. 5-3.
6.
Moisture reading only
In the Moisture only mode the IR Thermal
Camera Image is off and the meter shows
only the moisture reading in digits and in bargraph formats, see Fig. 5-1(c).
5.2.4 MOISTURE Modes
From the Main Menu select the MOISTURE mode icon (1). Refer to Fig. 5-4. Then choose
from the four Moisture mode options (items 2, 3, 4, and 5) as described below.
1.
Moisture Mode Icon from the Main Menu
2.
MATERIAL GROUPS
Select a Material wood group that best matches
the material under test. This applies only for
external pin-based probe use; Use the
navigation buttons to scroll through the group
list and use the Select button to choose the
group. The selected group will show a blue dot.
See the Material Wood Group List Appendix in
Section 9.
3.
PIN MODE
PIN mode must be selected when the external pin-based probe is used. Note the pin icon
(3) on the upper left of the main display when selected.
4.
PINLESS MODE
PINLESS mode must be selected when using the internal sensor. Note the pinless icon (4)
on the upper left of the main display when selected.
5.
SET REFERENCE MODE
SET REFERENCE is used to compare the displayed readings against a stored reference
measurement (see Section 5.2.7 Reference Mode). This mode applies only to readings
taken with the pinless internal sensor.
Fig. 5-4 Moisture mode icons
Fig. 5-3 Psychrometrics Screen
