FLIR Fido X4 Скачать руководство пользователя страница 56

Страница: 56 / 72

System Maintenance

Step 5:

Carefully remove the sensing element and dispose of it safely.

8.1.2 Installing the sensing element

Caution:

Breaking a sensing element will create sharp edges and glass shards

that can cut or puncture skin.

• Do not store sensing elements in clothing pockets.
• Do not put a sensing element where someone might sit or step on it.
• Properly dispose of used or broken sensing elements with care to avoid

injury.

Step 1:

Verify that the sensing element type marked on the packaging is the type you
want.

Step 2:

Remove a new sensing element from the packaging.

Step 3:

Hold it by the marked end (Figure 8-1).

Step 4:

Insert the unmarked end into the sensing element compartment in the Fido X4
(see Figure 8-5).

Step 5:

The sensing element will meet some initial resistance from the O-rings that it
seats into. Push it gently until it is fully seated.

Caution:

If you attempt to close the sensing element compartment door before the sens-
ing element is fully seated, you may break the sensing element.

Step 6:

Close the sensing element compartment door.

Step 7:

Using the display, select the appropriate sensing element type, then select

Con-

firm

(Figure 8-6).

Figure 8-6

: Selecting the sensing element type

Содержание Fido X4









































































Результаты поиска

Содержание Fido X4

Отзывы:

FLIR Fido X4, Руководство по эксплуатации, Страница: 56 / 72

Результаты поиска

Содержание Fido X4

Отзывы: